ABS 600 SV

The ABS 600 SV is an auger drilling machine with modular set-up. Depending on the required drilling method it is possible to fit the unit with different components. As a two meter pit version the ABS 600 SV enables operation with one meter tools. Additionally the machine can be modified for use in rectangular building pits in just a few simple steps. By mounting extension frames it is possible to drill 2 to 12 m in one casing length, for example for protective tube installation.


The machine along with the equipment sets cutting edge standards in the residential boring machines. Especially in intra-urban areas the set-up of big job sites is often not possible because of existing pipelines, cables, streets and sidewalks. The ABS 600 SV with an installation length of only 2000 mm is the perfect fit. It does not matter if the pit is round or rectangular. The controlled installation of product casings up to a diameter of 560 mm is possible.

Video 1      Video 2  

Technical Data ABS 600 SV

Torque max. 20.000 Nm
Hydraulic pressure  315 bar
Optical gap within pilot rods  60 mm
Revolution 1 max. 25 min -1
Revolution 2 max. 50 min -1
Feed force 970 kN
Relative adjustment existing
Stroke of slide 630 mm
Stroke relative adjustment 150 mm
Weight of drilling unit with basic equipment ca. 2.250 kg
Axis height 650 mm
Drilling diameter max. 620 mm
Dimension with base frame  
Length  / Width 2.000 / 1.350 mm

Technical Data PP 95 DS

Diesel engine Deutz
Power 95 kW bei 2300 u/min
Hydraulic pressure max. 330 bar
Diesel tank capacity 400 l
Weight  2.200 kg
Length / Width / Height

(Subject to technical modification)
3.050 / 1.050 / 1.951 mm